Diodes AH173 Manual de usuario descargar pdf

AH173

INTERNAL PULL-UP HALL EFFECT LATCH FOR HIGH

TEMPERATURE

AH173

Document number: DS31044 Rev. 10 - 2

1 of 9

www.diodes.com

July 2010

Description

AH173 is a single-digital-output Hall-Effect latch sensor with

pull-up resistor for high temperature operation. The device

includes an on-chip Hall voltage generator for magnetic

sensing, an amplifier to amplify Hall voltage, a comparator to

provide switching hysteresis for noise rejection, and an

output driver with a pull-up resistor (Rpu). An internal band-

gap regulator provides a temperature compensated supply

voltage for internal circuits and allows a wide operating

supply range.

When the magnetic flux density (B) is larger than operate

point (Bop), output is switched on (OUT pin is pulled low).

The output state is held on until a magnetic flux density

reversal falls below Brp. When B is less than Brp, the output

is switched off.

The AH173 is available in SIP-3L and SC59 packages.

Features

• Bipolar Hall-Effect latch sensor

• 3V to 20V DC operating voltage

• Built-in pull-up resistor

• 25mA output sink current

• Operating temperature: -40°C to +125°C

• SIP-3L and SC59 packages

(SC59 is commonly known as SOT23 in Asia)

• Green Molding Compound (No Br, Sb) (Note 1)

Pin Assignments

(Top View)

Vcc

GND

OUT

SIP-3L

1. Vcc

GND 2.

3. OUT

(Top View)

SC59

Applications

• Rotor Position Sensing

• Current Switch

• Encoder

• RPM Detection

Notes: 1. EU Directive 2002/95/EC (RoHS). All applicable RoHS exemptions applied. Please visit our website at

http://www.diodes.com/products/lead_free.html.

Typical Application Circuit

Driver

Control Logic

M: Three Phase Hall Motor

Digital Hall Effect Sensor

Hall Motor Driver

RPM sensing

3 Phase Hall Motor

1 2 3 4 5 6 7 8 9

Indice de contenidos

Pagina 1 - Control Logic

AH173INTERNAL PULL-UP HALL EFFECT LATCH FOR HIGH TEMPERATURE AH173 Document number: DS31044 Rev. 10 - 2 1 of 9 www.diodes.com July 2010 © Diodes In

AH173INTERNAL PULL-UP HALL EFFECT LATCH FOR HIGH TEMPERATURE AH173 Document number: DS31044 Rev. 10 - 2 2 of 9 www.diodes.com July 2010 © Diodes In

Pagina 3 - Marking Side

AH173INTERNAL PULL-UP HALL EFFECT LATCH FOR HIGH TEMPERATURE AH173 Document number: DS31044 Rev. 10 - 2 3 of 9 www.diodes.com July 2010 © Diodes In

Pagina 4 - Power Dissipation Curve

AH173INTERNAL PULL-UP HALL EFFECT LATCH FOR HIGH TEMPERATURE AH173 Document number: DS31044 Rev. 10 - 2 4 of 9 www.diodes.com July 2010 © Diodes In

Pagina 5

AH173INTERNAL PULL-UP HALL EFFECT LATCH FOR HIGH TEMPERATURE AH173 Document number: DS31044 Rev. 10 - 2 5 of 9 www.diodes.com July 2010 © Diodes In

Pagina 6 - (Top View)

AH173INTERNAL PULL-UP HALL EFFECT LATCH FOR HIGH TEMPERATURE AH173 Document number: DS31044 Rev. 10 - 2 6 of 9 www.diodes.com July 2010 © Diodes In

Pagina 7 - July 2010

AH173INTERNAL PULL-UP HALL EFFECT LATCH FOR HIGH TEMPERATURE AH173 Document number: DS31044 Rev. 10 - 2 7 of 9 www.diodes.com July 2010 © Diodes In

Pagina 8

AH173INTERNAL PULL-UP HALL EFFECT LATCH FOR HIGH TEMPERATURE AH173 Document number: DS31044 Rev. 10 - 2 8 of 9 www.diodes.com July 2010 © Diodes In

Pagina 9 - TEMPERATURE

AH173INTERNAL PULL-UP HALL EFFECT LATCH FOR HIGH TEMPERATURE AH173 Document number: DS31044 Rev. 10 - 2 9 of 9 www.diodes.com July 2010 © Diodes In

Comentarios a estos manuales

Sin comentarios

Diodes AH173 Manual de usuario

Busca en linea o descarga Manual de usuario para Hardware Diodes AH173. Diodes AH173 User Manual Manual de usuario

Indice de contenidos

Comentarios a estos manuales

Relacionado con productos y manuales para Hardware Diodes AH173